{"text_format":"3","workbook":"xls","n_sheets":1,"sheets":["Condition"],"not_rendered":{"external_links":1,"defined_names":1},"read":"whole","date_system":"1900","formulas":"cached_only"}

{"sheet":"Condition","index":0,"n_rows":46,"n_cols":3,"rows_kept":46,"flags":["formulas_cached_only"]}
["//*ID","Condition"]
["//c","c"]
["//唯一ID","条件表配置变量需M2设置推送前端，目前字母需全部大写，表达式不能有两个或以上空格连续出现，使用()时小括号左边不能有空格，建议无空格配置。\n条件检测：>大于、==等于 、<小于、>=大于等于、<=小于等于、~=不等于\n条件嵌套： &和、|或、+加、-减、()括号嵌套\n变量格式：<U10> > 0、<T9> == 123、<T9#VIP等级> == 10、<T9#记录> == nil、<HUMAN(变量)>+<N$变量)>+<U10> >= 100、<CONDITION,2>+<CONDITION,4> >= 100\n自定变量：<HUMAN(变量)> >= 1　　M2推送带\"$\" LUA声明获取请注意大小写(建议统一大写,目前此表只支持大写)\n使用表中的id1和id2的条件组：<CONDITION,1> & <CONDITION,2>\n常量格式：<LEVEL> == 26  其他常量自行测试\n嵌套格式：<CONDITION,10> & <LEVEL> >= 10\n多个嵌套：(<U1> == 1 & <U2> == 1) |(<U3> == 1 & <U4> == 1) 配置(小括号)时左侧不能有空格，例子为区分理解用空格配置，整行可不用空格配置。\n元变量例：<ITEM_COUNT,2> >= 1000 | <ITEM_COUNT,2000> >= 1  元宝(货币)≥1000 或 DIX对应物品(1000元宝券)≥1\n\n元变量查询：http://engine-doc.996m2.com/web/#/70/52114\n每单元格条件数超过100会失效，超出100条件组,可把条件分拆开在新行配置通过 <CONDITION,表ID> 检测新行ID即可。\n变量值为nil注意：变量若M2没正确推送/未申明/字符变量为空/时都返回nil空，需判断==nil为当前值\n变量若值为nil时判断等于0需注意：当值是nil时 <HUMAN(值NIL变量)>==0 这样配检测不到，可通过 + 0 避免值=nil时判断错误\n<HUMAN(值NIL变量)> + 0 == 0\n<HUMAN(值NIL变量)> + 0 < 1\n<N$M2未推变量> + 0 < 1\n例 <HUMAN(值NIL变量)>变量未申明时值是 nil 配置 <HUMAN(值NIL变量)>==0&<HUMAN(变1量)>>=1&<ITEM_COUNT,2>>=9 可能导致检测错误\n下面三种配置都是同要求正确配置：值NIL变量 = 0 变1量 ≥ 1 元宝 ≥ 9 同时件满足时条件达成。\n1、带空格配置(注意小括号左边不能有空格)\n(<HUMAN(值NIL变量)> == 0 | <HUMAN(值NIL变量)> == nil) & <HUMAN(变1量)> >= 1 & <ITEM_COUNT,2> >= 9\n2、无空格配置\n(<HUMAN(值NIL变量)>==0|<HUMAN(值NIL变量)>==nil)&<HUMAN(变1量)>>=1&<ITEM_COUNT,2>>=9\n3、通过+0简配\n<HUMAN(值NIL变量)>+0==0&<HUMAN(变1量)>>=1&<ITEM_COUNT,2>>=9","备注注释(开区请删除不需要的内容)"]
[1,"<U1> < 1","U1值小于1，需M2设置推送 格式：U1"]
[2,"<T1#VIP等级> == 123","键值等于123，需M2设置推送 格式：T1"]
[3,"<LEVEL> >= 10","等级大于等于10级"]
[4,"<N$无限变量> == 1","无限变量值等于1，需M2设置推送格式：N$无限变量"]
[5,"<RELEVEL> <= 100","转生等级小于等于100"]
[6,"<RELEVEL> <= 100 & <LEVEL> >= 10","等级10级以上且转生等级小于100"]
[7,"<CONDITION,1> & <LEVEL> == 10","表ID1满足且等级等于10级"]
[8,"<CONDITION,1> | <CONDITION,2>","表ID1或ID2满足"]
[9,"<ITEM_COUNT,2> >= 1000 | <ITEM_COUNT,2000> >= 1","元宝(货币)≥1000 或 DIX对应物品(1000元宝券)≥1"]
[10,"<{6}> == 1","个人标志[6]值=1，需M2设置推送 格式：[6]"]
[11,"<HUMAN(变量)> >= 1","自定义变量值大于0，需M2设置推送 格式：$HUMAN(变量)"]
[12,"<HUMAN(变NIL量)> == nil | <HUMAN(变NIL量)> == 0","数值型变量未用时返回nil检=0时要做变量为空检测"]
[13,"<HUMAN(变NIL量)>+0 == 0","数值变量nil值检=0时可通过运算简写，与上行等效"]
[14,"<ITEM_COUNT,2>+<ITEM_COUNT,4>+<ITEM_COUNT,20> >= 1000","多货币总和满足_数据库IDX"]
[15,"<ITEM_COUNT,3000>+<ITEM_COUNT,5000>+<ITEM_COUNT,8000> >= 1000","多物品总和满足_数据库IDX"]
[16,"<HUMAN(变量)>+<N$变量>-<U10>-<HUMAN(变量3)> <= 100","多变量运算满足"]
[17,"<N$变量>+<HUMAN(变量)> == 100 & <N$变量>+<HUMAN(变量)>+<U6> > 100 & <HUMAN(变1量)>+<N$变1量>+<U6>-<HUMAN(变2量)> <= 100","嵌套3组都并满足的条件运算表达式数值型变量可用 +,- 符连接运算"]
[18,"<N$1变量>-<N$2变量> >= 1","变量的大小对比"]
[19,"(<U1> >= 1 & <U2> == 1) |(<U3> >= 1 & <U4> == 1)","多条件嵌套,注意小括号左侧不能有空格"]
[24,"<N$1变量>~=0","不等于0"]
[25,"<N$1变量>+0<1","小于1（也是零值检测,可能是NIL返回+0运算避免出错）"]
[26,"<N$1变量>-<N$2变量>~=1","不等于1"]
[27,"<HUMAN(值NIL变量)> == 0 & <HUMAN(变1量)> >= 1 & <ITEM_COUNT,2> >= 9","有0检测当前配置可能会检测不到，下面三种配置是同一要求带==0检测的表达式"]
[28,"(<HUMAN(值NIL变量)> == 0 | <HUMAN(值NIL变量)> == nil) & <HUMAN(变1量)> >= 1 & <ITEM_COUNT,2> >= 9","1、带空格配置(注意小括号左边不能有空格)"]
[29,"(<HUMAN(值NIL变量)>==0|<HUMAN(值NIL变量)>==nil)&<HUMAN(变1量)>>=1&<ITEM_COUNT,2>>=9","2、无空格配置"]
[30,"<HUMAN(值NIL变量)>+0==0&<HUMAN(变1量)>>=1&<ITEM_COUNT,2>>=9","3、通过+0简配（推荐写法）"]
[20,"<CONDITION,21> | <CONDITION,22>| <CONDITION,23>","1级/红点列  条件ID21、22、23有一个满足该红点亮（首页-列表-明细-三级红点例）"]
[21,"<CONDITION,31> | <CONDITION,32>| <CONDITION,33>","2级/红点列1 条件ID31、32、33有一个满足该红点亮"]
[22,"<CONDITION,34> | <CONDITION,35>| <CONDITION,36>","2级/红点列2"]
[23,"<CONDITION,37> | <CONDITION,38>| <CONDITION,39>","2级/红点列3"]
[31,"<T3#31> == nil & <ITEM_COUNT,31131> >= 1","3级/红点列1-1"]
[32,"<T3#32> == nil & <ITEM_COUNT,31132> >= 1","3级/红点列1-2"]
[33,"<T3#33> == nil & <ITEM_COUNT,31133> >= 1","3级/红点列1-3"]
[34,"<T3#34> == nil & <ITEM_COUNT,31134> >= 1","3级/红点列2-1"]
[35,"<T3#35> == nil & <ITEM_COUNT,31135> >= 1","3级/红点列2-2"]
[36,"<T3#36> == nil & <ITEM_COUNT,31136> >= 1","3级/红点列2-3"]
[37,"<T3#37> == nil & <ITEM_COUNT,31137> >= 1","3级/红点列3-1"]
[38,"<T3#38> == nil & <ITEM_COUNT,31138> >= 1","3级/红点列3-2"]
[39,"<T3#39> == nil & <ITEM_COUNT,31139> >= 1","3级/红点列3-3"]
[40,"<EQUIPBYPOS,1> == 屠龙","装备位检测装备名称"]
[41,"<EQUIP_DATA,1>.Index == 30028","装备位检测装备idx"]
[42,"<MONEY_ASSOCIATED,29> >= 1500","元变量_指定IDX货币数量,支持通币货币关联检测"]
[43,"<MONEY,29> >= 1000","元变量_指定IDX货币数量"]